Cabletron Systems 6A000/ZX-250 - Manual (Page 52)

2-28 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
ClientARP
Use ClientARP (client address resolution protocol) to view the mapping of the MAC (media access control) or IP
addresses to an ATM address for LANE (LAN emulation) or IP/ATM (IP over ATM) clients.
Operator
show
Parameters
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the client. 0-127 ALL
Output Parameter Description
[MAC Address] MAC (media access control) address of the LANE client.
[IP Address] IP address of IP/ATM destination client.
[ATM Address] ATM address of either LANE or IP/ATM destination client.