Cabletron Systems 6A000/ZX-250 - Manual (Page 235)

SmartCell 6A000/ZX-250 Reference Manual 3-3
Boot Load Commands
chpi
Use chpi to set one of the two boot load software images as the default. Unless otherwise specified within the initial
reboot countdown, the default boot load software image is the image that is loaded into DRAM and executed.
Example
Set the boot load software image in boot PROM location 1 as the default image.
=>chpi 1
Modifying Default value for Boot Load Software,
please wait...
New default Boot Load Software value programmed
successfully.
New Default Boot Load Software value: 1
=>
Parameter Explanation
0 Set boot load software image stored in area 0 of the boot
PROM as the default image.
1 Set boot load software image stored in area 1 of the boot
PROM as the default image.