Unitec Sentine Owner’s Manual - Manual (Page 17)

S E N T I N E L
Document Number: SENT1002 7
Document Title: Sentinel Owner Manual
3.3.7 User Interface Set-up
The User Interface set-up page is used to change messages displayed to customers and adjust ‘time-out’
values for certain user screens. There are several features on this page that an operator may wish to
adjust including:

Greeting Message Delay – The delay from when a vehicle is detected (at the Sentinel) until the
greeting message is played.

Added Services Screen Timeout – The amount of time the Added Services offer screen will be
shown. If no selection is made within this time, the Sentinel will assume no added services are
desired and transition to the next screen.

Wash Options Screen timeout and text – Wash options are enabled (through the Wash Dispensing
page) to ask the consumer to select one of 2 options after their wash purchase. A typical use of
this feature is to ask the customer of a hybrid wash to choose either ‘ touchless or Soft Touch’. The
screen timeout allows the Sentinel to move to the next screen if the customer does not make
their selection within the allotted amount of time set by the timeout value.

Force Receipt – When enabled, a receipt will automatically be provided to each customer. When
disabled, customers will be prompted for a receipt and one will be provided if they press the
receipt button.

Banner Text – Not applicable to the Sentinel.

Wash Closed Text – The message that is displayed when the Sentinel closes, as programmed by
the Out of Service schedule.

Post Sale Text – A programmable message that will be displayed after a customer’s purchase if the
wash is busy.

Receipt Text – Used to program up to 3 lines of text in the receipt header and 7 lines in the receipt
footer.
3.4 User Management
Unique User IDs and passwords should be set up for employees, service personnel or others that may
need access to the Sentinel. The User Set-up pages are used to create new user accounts and to edit or
delete an existing account. User privileges that can be assigned are arranged in groups as follows:

User Management – Allows the user to set-up and manage other user accounts.

Device Access – Allows a user to open the Sentinel (without activating the alarm) and accessing
the maintenance mode of the Sentinel.

Device Set Up – Allows access to the device (profile) programming functions.