VICI TCD2 - Manual (Page 7)

3
Components of the Detector Systems
Components of the detector system are listed in Tables 1 and 2. Check the
contents of the packages to verify that everything is present. Contact the
factory if anything is missing or damaged. (NOTE: damaged shipments
must remain with the original packaging for freight company inspection.)
Introduction
Description Quantity Product number
Detector cell, Nickel-Iron filament 1 TCD2-NIFED
Controller unit with power cord 1 TCD2-C
Includes: Cable, output 2 I-24010
1/16' zero dead volume union 2 ZU1C
Fused silica adapter for 0.53 mm ID x 0.8 mm OD capillary column 2 FS1R.8
1/16" zero dead volume nut 2 ZN1
1/16" zero dead volume ferrule 2 ZF1
Table 1: Components of the TCD2-NIFE system
Description Quantity Product number
Detector cell, Tungsten-Rhenium filament 1 TCD2-WRE
Controller unit with power cord 1 TCD2-C
Includes: Cable, output 2 I-24010
1/16' zero dead volume union 2 ZU1C
Fused silica adapter for 0.53 mm ID x 0.8 mm OD capillary column 2 FS1R.8
1/16" zero dead volume nut 2 ZN1
1/16" zero dead volume ferrule 2 ZF1
Table 2: Components of the TCD2-WRE system
Specifications
Mains (line): 115/230 V~50/60 Hz, 175 VA
Fuse: 2 A, time-delay, 5 x 20 mm
Pressure: 6.9 kPa (1 psi) operating, 6.9 MPa (1000 psi) max.
working
Maximum temperature 300°C
Heater power: 60 W max., 48 V, PWM
Output impedance: 100
Ω