Waring MX1500XTXP - Manual (Page 8)

8
NOTE: 25% is the default speed setting in the reprogramming mode.
3. Press Speed Up
or Speed Down button to set the speed value.
The increment is 1% (150 RPM). Press and hold the button to quickly
scroll through speeds. The speed can be set between 15% and 100%.
4. Once required speed is reached, press button or wait 5 seconds
to confirm setting. The LCD will now prompt “USE UP/DOWN TO SET
TIME”. NOTE: Five seconds is the default time setting in the
reprogramming mode.
5. Use Speed Up or Speed Down button to set the time value (up to
90 seconds). Once 90 seconds are reached, pressing Speed Up will
not increase the value and the LCD will prompt “MEMORY LIMIT” for
2 seconds.
6. Press button or wait 5 seconds to confirm the setting. When the
blending time is confirmed, the LCD will prompt SELECT ANOTHER
SPEED. Repeat steps 3–5 if additional processing is needed.
NOTE: When pressing Speed Up
or Speed Down buttons to set
speed for next section, the LCD will prompt “USE UP & DOWN TO SET
SPEED: 25%”.
7. To save the new program settings, press both Speed Up and Speed
Down buttons simultaneously. The LCD will prompt NEW PROGRAM
(PROG #) SAVED for 5 seconds. The blender will return to STANDBY
mode and the LCD will prompt “PRESS ANY BUTTON TO BLEND”.
NOTE: If no button is pressed for 60 seconds when prompted to “ADD
NEW PROGRAM”, the blender will exit NEW PROGRAM mode and will
return to STANDBY mode. The new program will not be stored.
8. To run new programs, simply press the desired Program button and the
blender will run the program set by the user. The LCD will display NEW
PROGRAM # and will count down the set time.
RESTORING FACTORY-SET BEVERAGE STATIONS
1. To restore factory-set default beverage stations, press both
Speed Up and Speed Down buttons. LCD will prompt ADD NEW
PROGRAM.
2. Press
button. LCD will prompt RESTORE DEFAULT PROGRAMS.
3. Press button to confirm and save. The LCD will display the logo for
3 seconds.
4. The unit will return to STANDBY mode and the LCD will prompt PRESS
ANY BUTTON TO BLEND.
NOTE: The STOP key will abort this process at any point before
restoring default programs is confirmed.