Waring WFP14SC - Manual (Page 3)

3
GROUNDING INSTRUCTIONS
For your protection, this appliance is equipped with a 3-conductor cordset.
120 volt units are supplied with a molded 3-prong grounding-type plug (NEMA5-15P), and should be
used in combination with a properly connected grounding-type outlet as shown in Figure 1.
If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained to
enable a 2-slot wall outlet to be used with a 3-prong plug.
As shown in Figure 3, the adapter must be grounded by attaching its grounding lug under the
screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is
properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are
sure it is properly grounded.
NOTE: USE OF AN ADAPTER IS NOT PERMITTED IN CANADA. 220–240 volt “GS Safety
Approved” units are supplied with a molded European grounding-type plug (CEE 7/7).
The WFP14SC food processor features a seal system unlike any food processor in the industry. Now,
you can process larger volumes of liquid and don’t have to worry about removing the S-blade while
pouring. Waring Commercial has once again revolutionized food processing. This feature, along with
the continuous feed chute capabilities, makes the Waring Commercial WFP14SC food processor the
most versatile food processor in the industry.
10wc116296_wfp14sc_ib.indd 3 8/11/10 1:13:24 PM