Winchester Repeating Arms Super X2 (Historic Manual) - Manual (Page 33)

U SE OF E XTRA B ARRELS
A good way to extend the utility and usefulness of your
new Super X2 is with an extra barrel. All Winchester
Super X2 semi-auto shotgun barrels are completely inter-
changeable within gauge and chamber length. No special
fitting is required.
Some important restrictions must be observed:
1) Never use a barrel with a 3 1/2” chamber in a Super X2
designed for barrels with a 3” chamber.
2) Never use a barrel with a 3” chamber in a Super X2
designed for barrels with a 3 1/2” chamber.
3) Never use any other barrel from any other manufacturer
on your Super X2. Some other brands may seem similar,
but the barrels are not interchangeable.
5) Never use any barrel from a Winchester shotgun made
in the past, including barrels for the original Super X
Model 1 shotgun.
FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN INJURY TO YOURSELF OR
OTHERS.
C LEANING AND M AINTENANCE S UGGESTIONS
Your Super X2 will function better and more reliably over
a longer period of time if it is properly maintained and
kept clean.
BEFORE PERFORMING ANY CLEANING
PROCEDURES, ALWAYS MAKE CERTAIN
THERE ARE NO SHELLS IN THE CHAMBER,
MAGAZINE OR ACTION/FEED AREAS.
You should clean your Super X2 after every day
of shooting and more often if it becomes excessively dirty.
A minimum cleaning includes wiping down the action
and oiling key parts. Most regular maintenance will also
include cleaning the barrel. If you encounter a function
problem (tight action when working the
forearm) be sure to give your gun a thorough cleaning to
see if it solves the problem before seeking the services of
our service facility or a competent gunsmith. To clean
your firearm, adhere to the following general guidelines.
C LEANING PROCEDURES —
BE CERTAIN YOUR GUN’S CHAMBER AND
MAGAZINE ARE UNLOADED. ALWAYS WEAR
PROTECTIVE SAFETY GLASSES DURING
ALL CLEANING PROCEDURES. KEEP
AMMUNITION AWAY FROM THE CLEANING
33