Winchester Repeating Arms Super X2 (Historic Manual) - Manual (Page 6)

6
This can be repeated until the magazine is empty. A single
round can also be inserted into the chamber manually or
moved from a loaded magazine by cycling the action with
the bolt handle.
It is capable of shooing five shots (with the magazine plug
removed, using 2 3/4” loads) in rapid succession with each
pull of the trigger.
The short stroke of the gas piston along with the snug, gas
sealing fit of the piston rings and tight fit of the piston
rod, limits the amount of combustion gases blown past the
gas cylinder and into the receiver, keeping the inside of
the receiver clean.
This is an exceptionally advanced design that offers reliable
function of the gas system and easy disassembly for main-
tenance and cleaning. However, in order to keep your
new shotgun in top condition and operating at its peak
performance you must read, understand and follow all of
the instructions in this manual.
Prior to using live ammunition, familiarize yourself
thoroughly with these operating instructions. Get
accustomed to the feel of your new gun. Know the forces
required to operate the action. Learn how to pull the
trigger, and above all, know the location and operation of
the safety. Procedures for disassembly and operation of
various components are outlined in the sections below.
Please read and study them thoroughly. In addition,
always remember:
FIGURE 1
Invector Plus
Choke System
®
Magazine Cap
Forearm Magazine Tube
(inside forearm)
Carrier Release Button
Trigger
Guard
Recoil Pad
Ejection Port Vent Rib
Safety Trigger
Buttstock
Receiver