OSRAM SYLVANIA LEDstixx User Manual
Page 8
8
Notes:
1.
The wiring diagram is purely diagrammatic. The power supply DC output wiring must be kept separate from any AC wiring. Therefore the
orientation of the LEDstixx and subsequent wiring schemes to maintain this separation must be determined in the field.
2.
Contractor is responsible for providing any additional wiring necessary to feed from the output of the power supply to the “Input
Connector” noted in the diagram. Contractor is responsible for the connection of said “Input Connector” to additional wiring.
3.0
RELATED INFORMATION
3.1 List of Applicable and Related Documents:
Document LED192R2 – LEDstixx Vertical Refrigeration- 3 Series Product Information Bulletin (PIB)
Document ECS050 – Power Supply Product Information Bulletin (PIB)
Document LED093 – Electrostatic Discharge Protection for LED Systems
Document LED157 - LEDstixx® Lighting System Warranty
3.2 Responsibilities and Considerations
3.2.1
Owner/User Responsibilities:
It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate LEDstixx
and components in such a manner as to comply with all state and local laws, ordinances, regulation, ad the American
National Standards Institutes Safety Code.
3.2.2
Installation Configurations:
When planning a LEDSTIXX installation, OSRAM suggests doing the following:
Consult and Electrical Inspector to approve all wiring plans.
Refer to local and state codes for installation compliance.
Consult OSRAM Customer Service Center @ 1-800-LIGHTBULB.
LED348
OSRAM is a registered trademark of OSRAM GMbH.
Specifications subject to change without notice
© 2013 OSRAM SYLVANIA Inc. 5/13