Setting the clock – LaMotte SMART 2 Electronic Soil Lab User Manual
Page 37
n
SETTING THE CLOCK
Setting the clock allows the correct time and date stamp to be stored with each
reading in the data logger and with each reading sent out the serial port.
From the EDITING MENU use
t to scroll to Set
Clock
. Press
Q/ENTER to select.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Editing Logging
Factory Setup
Set PWR Save
The current date and time are displayed as month -
day - year on the first line and as hours : minutes :
seconds on the second line. A two-digit number is
displayed for each setting. Use
t and s to scroll to
the appropriate number and press
Q/ENTER to
select. The cursor will move to the next digit. Set all
subsequent numbers in the same manner. Selecting
the final digit in the seconds field stores the date and
time and returns to the EDITING MENU.
NOTE: These are looping menus.
SET TIME
MM - DD - YY
HH : MM : SS
EDITING MENU
* Set Clock
Editing Logging
Factory Setup
Set PWR Save
SMART2 SOIL MANUAL 1.07
37