Short form instructions – LaMotte Dissolved Oxygen Water Quality User Manual
Page 24
SHORT FORM INSTRUCTIONS
Read all instructions before performing test. Use this guide as a
quick reference.
1.
Fill Water Sampling Bottle (0688-DO).
2.
Add 8 drops of *Manganous Sulfate Solution (4167).
3.
Add 8 drops of *Alkaline Potassium Iodide Azide (7166).
4.
Cap and mix.
5.
Allow precipitate to settle.
6.
Use the 1.0 g spoon to add *Sulfamic Acid Powder (6286) or
add 8 drops of Sulfuric Acid, 1:1 (6141WT).
7.
Cap and mix until reagent and precipitate dissolve.
8.
Fill test tube (0608) to the 20 mL line.
9.
Fill Titrator with *Sodium Thiosulfate, 0.025N (4169).
10. Titrate until sample color is pale yellow. DO NOT DISTURB
TITRATOR.
11. Add 8 drops of Starch Indicator (4170WT).
12. Continue titration until blue color just disappears and solution
is colorless.
13. Read result in ppm Dissolved Oxygen.
LaMOTTE COMPANY
Helping People Solve Analytical Challenges
®
PO Box 329 • Chestertown • Maryland • 21620 • USA
800-344-3100 • 410-778-3100 (Outside U.S.A.) • Fax 410-778-6394
Visit us on the web at www.lamotte.com
67414-MN • 11/04