Installation instructions, Step 6, Step 7 – Quoizel KD2816MM Kendra User Manual
Page 4: Step 8
INSTALLATION INSTRUCTIONS
STYLE NUMBER KD2816MM
:
STEP 6
:
a Pass the Spacer Tube, the Check Ring, the Rubber Washer
and the Diffuser over the en of the Nipple. Secure them by
threading the Hex Nut onto the Nipple. Tighten until snug.
b Thread the Finial onto the Nipple and hand-tighten until
snug.
.
.
Finial
Hex nut
Outlet Box
Crossbar
Outlet Box
Screw
STEP 7
:
a Secure the Crossbar onto the Outlet Box with Outlet Box
Screws
Tighten until snug
.
.
.
4 OF 6
Nipple
Spacer Tube
Check Ring
Rubber Washer
Diffuser
STEP 8:
Pliers is required on this step
a
Thread one Hex Nut onto top end of the Nipple
b
Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar
c Using pliers
thread the Hex Nut against the crossbar
and hand tighten until snug
d
Thread another Hex Nut onto the bottom end of the
Nipple
*
.
.
.
.
.
.
,
.
.
.
Lock Washer
Crossbar
Hex Nut
Nipple
Hex Nut