Quoizel KD5005MM Kendra - Manual (Page 2)

2 OF 5
STEP 1 :
a Unfold the Support Arms to proper locations.
Match the Mounting Holes onto the holes on the
side of the Fixture Body
b. Thread Lock Screws into the Mounting Holes as
shown Hand tighten until snug to secure
Support Arms
.
.
.
.
STEP 2 :
a Thread the Nipple into the Hex Coupling in the
center of the Fixture Body Tighten until snug
b. Place the Cover and the Support Part over the
top end of the Nipple Secure them by threading
Fixture Loop onto the Nipple Hand tighten until
snug
.
. .
.
.
.
STEP 3 :
a Thread the Finial onto the nipple on the bottom
center of the Lower Junction Box Hand tighten
until snug
.
.
.
Support Arm
Fixture Loop
Support Part
Cover
Nipple
Fixture Body
Lower Junction Box
Finial
Fixture Body
Lock Screw
Mounting Hole
Hex Coupling
STYLE NUMBER KD5005MM : INSTALLATION INSTRUCTIONS