Quoizel TY5009AN Taylor - Manual (Page 3)

3 OF 5
STYLE NUMBER: TY5009AN, TY5009WT
INSTALLATION INSTRUCTIONS
STEP 2:
a. Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Socket
Assembly together as shown. Hand-tighten until snug.
STEP 3:
a. Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
b. Thread the Swivel onto the top end of the Upper Rod.
Hand-tighten until snug.
Swivel
Ceiling Canopy
Supply Wire with
Ground Wire
Upper Rod
6” Rod
12” Rod
12” Rod
6” Rod
Socket
Assembly
Supply Wires with
Ground Wire Coupling
STEP 4:
a. Screw the Mounting Screws into the Crossbar place
the Lock Washers over the Mounting Screws and
thread the Hex Nuts onto the Mounting Screws as
shown
Secure the position of the Mounting Screws by
tightening the Hex Nuts against the Crossbar
b. Secure the Crossbar to the Outlet Box with Outlet Box
Screws
,
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer