Quoizel UPSP5006IS Uptown Sutton Place User Manual

Page 7

Advertising
background image

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2011 QuoizelInc.

7of8

Figure 10

STEP 10

- Make Wire Connections

A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock

Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).

B. Push all slack fixture wire through Canopy Chain Loop (F)

into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.

C. Use standard wire connectors to make all wire connections.

(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.

D. Connect White Supply Wire from the Outlet Box to White

Wire from fixture.

E. Connect Black (or Red) Supply Wire from the Outlet Box to

Black Wire from fixture.

F. Connect Ground Wire from the Outlet Box to Ground Wire

from fixture.

G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and

carefully stuff all the connected wires into the Outlet Box.

G. Re-attach the Ceiling Canopy (E) as shown in Step 6.

Canopy Chain Loop

Fixture Chain

Supply Wire and
Ground Wire

Supply Wire
and Ground
Wire from
Outlet Box

Ceiling Canopy

Canopy Lock Ring

Figure 11

White wire from supply

White wire from fixture

Black wire from supply

(or Red)

Black wire from fixture

Ground wire from supply

Ground wire from fixture

Assembly Instruction Sheet #IS-UPSP5006IS

For Style UPSP5006IS

STEP 11

Assemble Side Arms

-

( )

A. Align the holes on the ends of the Side Arms

M

to

mounting holes on the side of the Support Arms as shown.
Thread Lock Screws (N) into the mounting holes on the
Support Arms to secure Side Arms(M).

B. Align the hole on the top end of the Side Arm (M) to the

mounting holes on the side of the Center Column (I).
Thread Lock Screws (N) into the mounting holes on the
side of the Center Column (I) to secure the Side Arms (M).

C. Hand tighten all Lock Screws (N) until snug.

Figure 12

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

,

.

.

.

Center Column

Lock Screw

Mounting Hold

Side Arm

Fixture Assembly

Lock Screw

Mounting Hole

November2011

Advertising