Quoizel ADM1512AN Admiral User Manual
Page 5
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
5of6
Assembly Instruction Sheet #IS-ADM1512AN
For Style ADM1512AN
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2013 QuoizelInc.
October2013
STEP 9 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (I) and slide Canopy Lock
Ring (I) and Ceiling Canopy (E) down the Fixture Chain.
B. Push all slack fixture wire through Canopy Chain Loop into
Outlet Box. Trim excess fixture wire leaving a minimum of 6
inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
I. Re-attach the Ceiling Canopy (E) as shown in Step 6.
Figure 9
White wire from supply
White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply
Ground wire from fixture
Figure 10
Figure 8
Supply Wire
and Ground Wire
Fixture Chain
Canopy Chain
Loop
STEP 8
Pass Supply Wires through Fixture
Chain
-
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (F) alternating links. Push the wires up
through the Canopy Chain Loop (H) into the outlet box.
Canopy Lock Ring
Fixture Chain
Ceiling
Canopy
Supply Wire
and Ground
Wire from
Outlet Box
Canopy Chain
Loop
Supply Wire and
Ground Wire