Quoizel IE1508BN Ibsen - Manual (Page 2)

ASSEMBLY INSTRUCTIONS
2 OF 3
STYLE NUMBER IE1508BN :
STEP 3:
a Screw the Mounting Screws into the Crossbar
place the Lock Washers over the Mounting Screws
and thread the Hex Nuts onto the Mounting Screws
as shown
Secure the position of the Mounting
Screws by tightening the Hex Nuts against the
Crossbar
b Secure the Crossbar to the Outlet Box with Outlet
Box Screws
. ,
.
.
.
.
STEP 1:
a Determine the Rods to be assembled according to
your desired hanging height.
b Pass the Supply Wires with Ground Wire through
the chosen Rods and then thread Rods and Socket
Assembly together as shown. Tighten until snug.
.
.
STEP 2:
a Pass the Supply Wires with Ground Wire through
the Swivel and Ceiling Canopy.
b Thread the Swivel onto the top end of the Upper
Rod and hand tighten until snug.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer
6” Rod
12” Rod
12” Rod
6” Rod
Socket Assembly
Swivel
Ceiling Canopy
Supply Wire with
Ground Wire
Upper Rod
Supply Wires with
Ground Wire