Quoizel LNA1506K Lena User Manual

Page 2

Advertising
background image

2of2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2014 QuoizelInc.

Feburary2014

LNA1506K

PART NUMBER

NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"

REPLACEMENT PART DESCRIPTION

REQ.

NO.

(1) 100W

Bulb

(Not Supplied)

Medium

Base

1

FINISH: MYSTIC BLACK

STEP 4

Wire Connections

-

A. Use standard wire connectors (not included) to make all wire

connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.

B. Connect White Supply Wire from the Outlet Box to Ribbed Side Wire

from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth

Side Wire from Fixture.

D. Connect Ground Wire from the Outlet Box to Ground Wire from

fixture.

E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

White wire

from supply

Black wire from
supply (or Red)

Ground wire

from supply

Ribbed side wire
from fixture

Smooth side wire
from fixture

Ground wire
from fixture

Figure 4

Mounting
Screw

A

AA

Mounting Ball

Figure 5

STEP 5

Install Fixture Body

-

A. Carefully tuck all wires into the outlet

box and position the Ceiling Canopy
(A) over the outlet box. Align the
holes in the Ceiling Canopy (A) with
the mounting screws, then attach the
Ceiling Canopy (A) using the
previously removed mounting balls.
Hand tighten until snug.

Figure 6

STEP 6

Install Shade

-

A. Place the Shade (F) and the Steel Collar

(G) over the Socket as shown. Secure by
threading the Socket Collar (H) onto the
Socket. Hand tighten until snug.

Socket

F

G

Figure 8

STEP 8

Install Bulb

-

A. This fixture uses standard bulb with medium

base. Maximum 100 watts.

B. Insert bulb and screw snugly into place.

Your fixture is now assembled and ready to
use. Enjoy!

Bulb

H

Figure 7

STEP 7

Install Crystal Pendant

-

A. Attach Crystal Pendants (E) onto Branches

as shown.

Branch

E

5

” Dia.

1

6.5

10

6

” Dia.

47

OVERALL HEIGHT

(2) 6

” AND (2) 12” RODS

INCLUDED

Advertising