Quoizel PCBV1617C Platinum Collection Bravado User Manual

Page 2

Advertising
background image

2of2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2014 QuoizelInc.

January2014

STEP 6 - Install Shade

A. Attach the Shade (H) onto the Ring (B) and secure by threading the

Finial (I) onto the Lock Screw (C). Tighten gently until snug.

Your fixture is now assembled and ready to use. Enjoy!

C

H

I

Figure 6

STEP 5 - Install Bulb

A. This fixture uses standard bulb with medium base. Maximum 60

watts.

B. Insert bulb and screw snugly into place.

Figure 5

Bulb

STEP 4 - Wire Connections

A. Use standard wire connectors (not included) to make all wire

connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.

B. Connect White Supply Wire from the Outlet Box to Ribbed side Wire

from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth

side Wire from fixture.

D. Connect Ground Wire from the Outlet Box to Ground Wire from

fixture.

E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

White wire

from supply

Ribbed side wire
from fixture

Black wire from
supply (or Red)

Smooth side wire
from fixture

Ground wire

from supply

Ground wire
from fixture

Figure 4

B

PCBV1617C

PART NUMBER

G3817MR

G3816SH

NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2

"

REPLACEMENT PART DESCRIPTION

MIRROR GLASS 16.5"D

SHADE ETCHED PAINTED INSIDE GLASS

REQ.

1

1

NO.

(3) 60W

Bulbs

(Not Supplied)

Medium

Base

1

2

FINISH: POLISHED CHROME

Hex Nut (CC) is needed here to prevent you from crushing down the
center of the Ceiling Canopy (A).

E. Refer to Step 4 for wire connections.
F. Attach the Ceiling Canopy (A) over the end of the Nipple (DD) and

secure with the Mounting Ball (EE). Hand tighten until snug.

TWO LIGHTS SHOWN FOR ILLUSTRATION PURPOSE ONLY.

13.5” Dia.

16.5” Dia.

3”

4.5”

9” Dia.

1

2

Advertising