Quoizel LP1717IB La Parra - Manual (Page 2)

STEP 1:
a Thread the Nipple into the Hex Coupling underside of the
Socket Cluster. Using plier, thread the Hex Nut against the
Hex Coupling and hand tighten until snug.
.
STEP 2:
a Locate top ends of Decorative Chains onto Hooks on the
side of the Ceiling Canopy as shown.
b. Lift the Decorative Ring upward and locate the Hooks on it
onto the bottom ends of the Decorative Chains.
.
STEP 3:
a Locate the following components over the end of the
Nipple in turn:
Spacer Tube, Check Ring, Rubber Washer, Shade and Flat
Washer.
b. Thread the Hex Nut (1/8IP) onto the end of the Nipple and
tighten until snug to secure the above parts.
c. Locate the Cap over the end of the Nipple and secure with
the Finial. Hand tighten until snug.
.
INSTALLATION INSTRUCTIONS
STYLE NUMBER LP1717IB :
Hook
Shade
Nipple
Spacer Tube
Check Ring
Flat Washer
Cap
Rubber Washer
Hex Nut (1/8IP)
Finial
Decorative
Chain
Wheel Part
Ceiling
Canopy
Hex Coupling
Nipple with
Hex Nut
Hook
Fixture Pan
2 OF 3
Socket
Assembly
Decorative
Ring