Quoizel WV1716BN Waverly - Manual (Page 2)

INSTALLATION INSTRUCTIONS
2 OF 3
STEP 1:
a. Screw one end of the Stem with Hex Nut into the hex
coupling underside of the Socket Cluster. Using pliers,
thread the Hex Nut against the hex coupling and hand-
tighten until snug.
STEP 2:
a. Lift the Shade over the Stem with Hex Nut, attach the
Tabs in it to the ends of the Side Arms. Thread the Lock
Screws into the end of the Side Arms and hand-tighten
until snug to secure the Shade.
STEP 3:
a. Place the Diffuser and the Rubber Washer over the end
of the Stem. The Diffuser should attach to the Studs in
the bottom edge of the Shade. Secure by threading the
Finial onto the Stem. Hand-tighten until snug.
STYLE NUMBER: WV1716BN
Socket Cluster
Stem with Hex Nut
Lock
Screw
Shade
Stem with
Hex Nut
Side Arm
Tab
Shade
Rubber Washer
Stem with Hex Nut
Diffuser
Finial
Stud