Quoizel TF6825CN Pomez - Manual

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended:
Estimated Assembly Time:
Preparation:
(2) Medium Base 75W Maximum, Alternate bulb (2) 19W CFL
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-TF6825CN
For Style TF6825CN
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc. May2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
A. Thread Socket Assembly onto
the Base. Pull the cord from the
Base as you assemble the parts
together to remove the excess
cord between parts.
B. Place Spacer and Check Ring
over the Nipple, secure by
threading Small Knurled Nut
onto the Nipple, tighten until
sung.
C. Thread Big Knurled Nut onto the
Nipple, place Flat Washer and
Shade over the Nipple, secure
by threading the Finial onto the
Nipple. Hand tighten until sung.
D. This fixture uses standard bulb
with medium base . Maximum
75 watts. Insert bulb and screw
snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
TF6825CN
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/2 "
REPLACEMENT PART DESCRIPTION
NO.
(2) 75W
Bulb
(Not Supplied)
Medium
Base
REQ.
FINISH: CINNAMON
Base
X 1
INSTALLATION
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
Socket
Assembly
X 1
Spacer
X 1
Nipple with
Hex Nut
X 1
Check Ring
X 1
Big
Knurled Nut
X 1
Small
Knurled Nut
X 1
Flat Washer
X 1
Shade
X 1
Finial
X 1
1
2
3
M860BLA
16825CNT
C110FIR
BALL
BASE
FINIAL
2
1
1
NO.
1
16”Dia.
20.5”
7”
4 G6017SH SHADE 1
2
3
4