Quoizel CAN8411WB Carson - Manual (Page 3)

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Figure 1
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
3of5
STEP 1
- Attach Cup and Cover to Fixture
Body
A. Screw on end of the Nipple with Hex Nut (J) into the Hex
Coupling on the top of the Fixture Body (K). Using
pliers, thread the Hex Nut against the Hex Coupling and
hand tighten until snug.
B. Pass the Cup (I), the Cover (G) and the Waterproof
Washer (H) over the top end of the Nipple (J) as shown.
Secure by threading the Finial (F) onto the Nipple (J).
Hand tighten until snug.
Assembly Instruction Sheet #IS-CAN8411WB
For Style CAN8411WB
STEP 3
- Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 2
- Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the backplate of the Fixture Body (K).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
Finial
Cover
Cup
Nipple with Hex Nut
Hex Coupling
Fixture
Body
Figure 2
Figure 3
Mounting
Screw
Crossbar
Lock Washer
Hex Nut
Fixture
Body
Crossbar
Outlet Box
Outlet Box
Screw
Mounting Hole
September2011
Waterproof Washer