Quoizel HY8411IB Harmony User Manual

Quoizel Lighting

Advertising
background image

FIXTURE SUPPLY WIRE

and GROUND WIRE

OUTLET BOX

(2) MOUNTING SCREWS

(2) OUTLET BOX SCREWS
(not supplied)

CROSSBAR

( )

2 MOUNTING BALLS

BACKPLATE

LOCK BALL

FIXTURE HOOD

SOCKET

STUD

FIXTURE FRAME

with SHADE

1. Before beginning installation, carefully unpack and identify all parts referring to

the illustration.

2. Turn power to installation point OFF at circuit breaker.

3.Install the correct bulbs referring to the fixture markings and/or labels for

maximum wattage.

4.

5.

Take off the PAPER CARDS from top end of the FIXTURE FRAME and the

space between the FIXTURE FRAME and SHADE Lift the FIXTURE FRAME
with SHADE upward and make sure the STUDS through the holes on the
FIXTURE HOOD Secure by threading LOCK BALLS onto STUDS and hand
tighten until snug

Place the CROSSBAR on the BACKPLATE and align the holes in the

BACKPLATE with a set of threaded holes in the CROSSBAR. Install the
(2) MOUNTING SCREWS in the aligned threaded holes on the CROSSBAR.
Next, mount the CROSSBAR to the outlet box with (2)OUTLET BOX
SCREWS (not provided).

6. Make the connections: Use wire connectors(not supplied) connect the HOUSE

GROUND to the FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE
to FIXTURE WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE
BLACK (or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE.
Wrap each connection with approved electrical tape.

7. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and position the

fixture over the outlet box. Align the HOLES in the BACKPLATE with the

2 MOUNTING SCREWS attached to the CROSSBAR. Pass the fixture over

the 2 MOUNTING SCREWS and secure against by threading 2 MOUNTING
BALLS onto end of screw. Tighten until snug.

8. Refer to Page 2 for fixture caulking instructions.

9. Restore power to the installation point ON. Retain this sheet for future reference.

.

.

.

;

( )

( )

( )

INSTALLATION INSTRUCTIONS

PAPER CARD

remove it while assembly

(

)

PAPER CARD

remove it while assembly

(

)

IS-HY8411
Page 1 of 2
2007-03-03

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

,

.

.

.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN!

Advertising