Quoizel RO8414AC Rue De Royal User Manual

Assembly / installation instructions

Advertising
background image

FIXTURE SUPPLY WIRE

and GROUND WIRE

OUTLET BOX

(2) MOUNTING SCREWS

(2) OUTLET
BOX SCREWS
(not supplied)

UNIVERSAL

CROSSBAR

BACKPLATE

( )

2 MOUNTING BALLS

CAGE

SOCKET

BOLT

DOOR

BOLT HOLDER

ASSEMBLY / INSTALLATION INSTRUCTIONS

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

,

.

.

.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN!

IS-RO8311

Page 1 of 2

Revised 2008 03 22

- -

Note

If you find any Tabs do not engage Glass Panels well during assembly

please

push the Tabs until they are attaching onto the Glass Panels

:

,

.

.

.

( )

( )

( )

1. Before beginning the installation, carefully unpack and identify all parts referring to

illustration.

2 Turn the electrical power to installation point OFF at circuit breaker

3 Open the DOOR and install the correct bulbs referring to the fixture markings

and or labels for maximum wattage

Proceed to close the DOOR by placing the

BOLT onto the BOLT HOLDER

4. Place the CROSSBAR on the BACKPLATE and align the holes in the BACKPLATE with a

set of threaded holes in the CROSSBAR. Install the (2) MOUNTING SCREWS in the
aligned threaded holes on the CROSSBAR. Next, mount the CROSSBAR to the outlet
box with (2)OUTLET BOX SCREWS (not provided).

5.

:

Use wire connectors(not supplied) connect the HOUSE GROUND to the FIXTURE

GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE WHITE (or RIBBED
SIDE) SUPPLY WIRE; connect the HOUSE BLACK(or RED) WIRE to the FIXTURE
BLACK(or SMOOTH SIDE) WIRE. Wrap each connection with approved electrical
tape.

6. Carefully tuck all wires into the WALL MOUNTED OUTLET BOX and position the fixture

over the outlet box. Align the HOLES in the BACKPLATE with the 2

MOUNTING

SCREWS attached to the UNIVERSAL CROSSBAR. Pass the fixture over the

2 MOUNTING SCREWS and secure against by threading

2 MOUNTING BALLS

onto end of screw. Tighten until snug.

7.Refer to Page 2 for fixture caulking installations.

8. Restore power to the installation point ON. Retain this sheet for future reference.

,

.

/

.

.

;

Make the connections

GLASS PANEL

TAB

Advertising
This manual is related to the following products: