Monarch Instrument DC1250 - Manual (Page 30)

29
TIME STAMP
NONE No imprint of TIME or DATE on TREND display
TIME ONLY TIME imprints on TREND display
TIME & DATE TIME and DATE imprint on TREND display
TOP
Set location of Time (& Date) imprint to TOP of
TREND
MIDDLE
Set location of Time (& Date) imprint to MIDDLE of
TREND
BOTTOM
Set location of Time (& Date) imprint to BOTTOM of
TREND
MENU TIMEOUT
NEVER
MENU will never Collape (and revert to display
mode)
30 SEC to
30 MINUTES
Choose MENU TIMEOUT from 30 seconds
to 30 Minutes. Menu will revert back to normal
display.
BACKLIGHT
LIGHT TIMEOUT
NEVER BackLight will never shut off
30 SEC to
30 MINUTES
Choose time to backlight shut off from 30 seconds to
30 Minutes after inactivity.
BATTERY OFF
Select to turn back light off in battery mode to save
power. (battery is optional)
PEN TYPE
CHAN A -
SOLID Set CHAN A TREND line to SOLID ______
DOT Set TREND line to a series of DOTS ……….
DASH Set TREND line to a series of DASHES - - - -
DOT-DASH Set TREND line to a series of DOTS and DASHES
CHAN B - Set CHAN B TREND lines as above
DISPLAY ADJ. Same as Top Level Menu option (see above )
4.5 DATA CARD
This option contains duplicate menu items to those found in the RECORD MODE menu. In
addition it enables the user to test the card and format it for use (recommended). Use the
Up Arrow (▲) or Down Arrow (▼) buttons to scroll and highlight DATA CARD.. and press
the MENU button. The menu options are shown below.
NAME FILE Enter the name for recorded files
up to 8 Characters. Use ▼▲► keys.
◄ key to escape
Use MENU key to Save and Exit
SAVE CONFIG Save Configuration
Enter Config File Name - up to 8 Characters.
Use ▼▲► keys.
◄ key to escape. Press MENU to save and exit
LOAD CONFIG Load Configuration. Unit will show list of files.
Use ▼▲ to select, ◄ key to escape. MENU to select and load.
Unit will restart on successful load
TEST CARD This is a non-destructive test to check the card.
ERASE CARD Erase File. Unit will show list of files on card
Use ▼▲ to select, ◄ key to escape. MENU to select and erase.
FORMAT CARD This will FORMAT the card for use in the recorder.
ALL DATA WILL BE DESTROYED
TABLE OF CONTENTS