Wheatheart X13 1000RPM PTO - Manual (Page 5)

5
Figure 4 Installing Tow Bar
17. Re-install PTO driveline to splined stub shaft in the gearbox using existing 3/
8” x 1-3/4” square key and 3/8” roll pin. Tighten set-screws securely.
18. Remove chocks from the wheels.
3/4” X 5-1/2”
BOLT [29997]
3/4” LOCKNUT
[19601]
3/4” X 3-1/2” X 5” U-BOLT
[28487]
TOW BAR
BOOT CHANNEL
3/4” LOCKNUT
[19601]
THROUGH THIS
BOLT HOLE