Wheatheart Portable Drive Over Pit - Manual (Page 20)

4. T RANSPORT W HEATHEART - P ORTABLE D RIVE O VER P IT
4.1. T RANSPORT P REPARATION 10" & 13"
20 30686 R0
11. Install the hitch assembly in the frame and secure with the retainer pin and
anchor.
12. Back the towing vehicle up to the Portable Pit.
13. Set the park brake before dismounting.
14. Connect the Portable Pit to the towing vehicle and use a retainer to lock the
hitch draw pin in place.
15. Install the safety chain between the tongue of the Portable Pit and the frame
of the towing unit. Loop the chain under the tongue to form a cradle that will
prevent the tongue from digging into the road surface and upsetting the
trailer should a break-away occur. Ensure there is enough slack in the chain
for turning. When not in use, store the safety chain in a clean dry place.
Replace the safety chain if one or more links or end fittings are broken,
stretched, or otherwise damaged or deformed. Refer to Figure 4.4.
Figure 4.4 Safety Chain (Not Supplied)
16. Remove and stow the jack.
WARNING
To prevent serious injury or death, before
transporting, you must:
• Chain the drive-over ramps together.
• Install and secure the transport wheel lock
pins.
• Install and secure the hitch pin retainer.
• Install a safety chain between the towing
vehicle frame and the Portable Pit hitch
tongue.