Wheatheart Portable Drive Over Pit - Manual (Page 25)

W HEATHEART - P ORTABLE D RIVE O VER P IT 5. O PERATION
10" & 13" 5.3. O PERATING P ROCEDURE
30686 R0 25
12. HYDRAULIC MODELS: Position the hydraulic system lever to provide flow to
the hydraulic circuit selector valve. The augers will start rotating. Check
wheel lift system to ensure all components are able to move unobstructed
and pit may be lowered in a safe manner.
13. Remove the transport lock pins. You may have to extend or retract the wheel
lift cylinder slightly to release the load on the pins. Refer to Figure 5.4.
Figure 5.4 Remove Pins
14. Lower the frame to the ground by retracting the wheel lift cylinder. The auger
will slow down but continue to turn.
15. Stow the transport lock pins in the transport frame arms.
WARNING
Damaged hydraulic hoses can fail suddenly
causing unexpected movement of the
machine that will result in serious injury or
death.
• Route hydraulic hoses to prevent pinch-
ing, rubbing, or binding.
• Keep the hoses away from moving parts.
• Secure the hoses to the machine to pre-
vent dragging while transporting.
• Cover or protect the hoses from damage
during operation.
• Repair or replace damaged hoses. DO
NOT attempt any makeshift repairs.
CAUTION
Axle and wheels move rearward as frame is
lowered to the ground.
Stand clear when activating the hydraulic
controls to avoid personal injury, and ensure
others are clear of pit.