Operation, transport, & maintenance, Operating procedure – Wheatheart GHR Augers Intake Hopper User Manual
, & M
3. Operation, Transport, &
3.1. OPERATING PROCEDURE
1. For other auger-related placement instructions, please refer to your auger
2. Remove tow bar from hopper. Place auger/hopper in desired location (for
example, under a bin hopper). See Placement instructions in auger operator
3. Set the hopper to self-level by disconnecting transport channel at top end.
4. To clean out after use, remove the cleanout cover by removing the four 5/16”
nuts holding it in place and use a vacuum or other tool to clean out.
This manual is related to the following products: