Great Plains 3N-30P Assembly Instructions - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
196-264m
3-Section Folding No-Till Precision Seeding System
Monitor Systems Option
• 3N - 3010P & 3020P
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the mon-
itor system option(s).
These instructions apply to:
833-232C 30P-48 Row 7.5" Row Spacing
833-233C 30P-36Row 10" Row Spacing
833-234C 30P-24 Row 15" Row Spacing
and Twin Row only Machines
Refer to pages 9 and 10 for templates if there are
no predrilled holes.
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the drill will
travel while in use.
6/4/2002
Refer to the drill operator’s manual for detailed in-
formation on safely operating, adjusting,
troubleshooting and maintaining the drill. Refer to
the parts manual for part identification.
Manual Part Numbers
196-248M 3N-3010P and 3020P Operator’s
Manual
196-248P 3N-3010P and 3020P Parts
Manual
DJ Manual-Supplied in Option Bundles
Refer to this manual for instructions regarding the
console assembly, speed sensor, and other sche-
matic illustrations.
NOTE: Be sure you have the correct instructions for the monitor system you are
using.
833-232C 30P-48 Row 7.5" Row Spacing Begin on page 2
833-233C 30P-36 Row 10" Row Spacing Begin on page 4
833-234C 30P-24 Row 15" Row Spacing Begin on page 6
and Twin Row only Machines