Great Plains 3P600 Assembly Instructions - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
151-071M
6 Foot Drill
Seed Box Agitator Option
• 605NT
• 3P605NT
• 3P600
General Information
Assembly Instructions
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
Agitator Shaft
See
Figure 1
Seed Box Cover Removal
18726
Figure 1:
1. Remove covers (1) from inside both ends of
seed box by removing bolt (2), lock washer (3)
and hex nut (4).
4/26/2000
Before You Start
Beginning on page 8 are detailed listings of parts
included in the agitator option packages. Use the
proper list to inventory parts received.
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
These instructions explain how to install the agita-
tor option. The agitator stirs the seed directly
above the metering cups. It is intended to cut
down on the "bridging" of light fluffy seeds.
These instructions apply to:
118-748A 3P600 Agitator w/Drive - 7-1/2"
118-749A 3P600 Agitator w/o Drive - 7-1/2"
118-750A 3P605NT & 605NT Agitator
w/Drive
118-751A 3P605NT & 605NT Agitator w/o
Drive
118-788A 3P600 Agitator w/Drive - 6"
118-789A 3P600 Agitator w/o Drive - 6"
Manual Update
Refer to the 6 foot drill operator’s manual for de-
tailed information on safely operating, adjusting,
troubleshooting and maintaining the agitator op-
tion. Refer to the parts manual for part
identification.
Drill Manual Part Numbers
151-061M 605NT & 3P605NT Operator’s
Manual
151-061P 605NT & 3P605NT Parts Manual
118-794M 3P600 Operator’s Manual
118-794P 3P600 Parts Manual