Great Plains 3P600 Assembly Instructions - Manual (Page 2)

151-071M 3/31/2004
Great Plains Mfg., Inc.
Seed Box Agitator Option 2
5. Slide lock collars (8 and 10) against bearing
and flanges (7 and 11) and tighten set
screws. See
Figure 2
Agitator shaft Installation 18727
Figure 2:
2. Slide agitator shaft (5) into seed box from left
side of drill.
3. As shaft advances, slide on parts in the fol-
lowing order.
• 35 tooth sprocket (6)
• bearing and flanges (7)
• lock collar (8)
• bearing and flanges (9)
• lock collar (10)
• bearing and flanges (11)
4. Attach bearings and flanges to divider (12)
and inside of end panels (13 and 14) with 5/16
x 1 inch round head bolts, lock washers and
hex nuts.