Great Plains 3P605NT Assembly Instructions - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2006 Printed 09/25/2006 151-125M
6 Foot No-Till Drills
Grease Bank
Used with:
• 605NT
• 3P605NT
General Information
These instructions explain how to install the Grease Bank
kit on a drill originally purchased without one.
The 151-124A Grease Bank provides a single easily
accessible point for supplying lubricant to all 9 coulter
pivot assemblies. The kit includes all necessary compo-
nents except grease.
These instructions apply to:
Use this kit only with Great Plains model 605NT &
3P605NT drills. Kit hardware is sufficient only for these
models. Do not modify the drill for use with attachments
other than Great Plains options and accessories speci-
fied for use with the drill.
Figure 1
Installed Grease Bank
Before You Start
Inventory the kit contents per the “Parts List” on page 4.
Review the installation instructions in this manual, to
ensure that the steps are understood, and that the nec-
essary resources are at hand.
If necessary, move the drill to a suitable work location.
Lower the unit to the ground.
Have the following tools at hand:
• Basic hand tools
• Tubing cutter
• Grease gun and grease.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use.
IMPORTANT !
A crucial point of information related to the preceding
topic. Read and follow the directions to remain safe,
avoid serious damage to equipment and ensure de-
sired field results.
Note: Useful information related to the preceding topic.
When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
!
151-124A 6’ Grease Bank Field Kit
25093