Great Plains 3P605NT Assembly Instructions - Manual (Page 4)

Great Plains Mfg., Inc.
4 Grease Bank
151-125M 09/25/2006
Refer to Figure 8.
12. Fill each position with grease, checking for leaks.
Add grease until excess grease appears at the
coulter bearing.
Figure 8
Emerging Grease at Coulter
Periodic Lubrication
This section covers general operating procedures once
the Grease Bank kit is installed and filled with grease.
1. Ensure that the drill is immobilized, either:
• parked, blocked and lowered, or
• securely hitched to a tractor that is shut off (key re-
moved) and has its parking brake engaged.
2. Inspect grease tubing for damage and leaks.
3. Have a suitable grease & grease gun at hand.
4. Clean grease bank zerks of debris.
Coulter Bearings
9 zerks per drill
(at grease bank if installed)
Type of lubricant: Grease
Quantity: until grease emerges
Parts List
151-124A 6’ Grease Bank Field Kit
Your kit includes:
Great Plains Manufacturing, Inc.
Corporate Office: PO Box 5060
Salina, KS 67402-5060 USA
25100
8
Ref. Qty. Part No. Part Description
1 151-125M This document
➀
1 151-259D 6’ GREASE BANK MOUNT (Arm)
➁
1 149-553D GREASE BANK (Plate)
➂
9 800-130C ZERK GREASE STRAIGHT 1/8-27
➃
12 800-303C CABLE TIE 2 MIN - BLACK
➄
9 800-158C FTG. TUBE, CONNECTOR 1/8 FNPT
➅
2 802-014C HHCS 3/8-16 NYLON INSERT
➆
2 803-078C NUT LOCK 3/8-16 NYLON INSERT
➇
42’ 990-109R TUBE NYLON 1/4 OD X 062 WL
➈
9 800-211C GREASE ADAPT 1/4-28M X 1/4TB
➉
1 802-091C HHCS 1/2-13 X 1 1/2