Great Plains 8030-3P Wide Row Planters - Manual (Page 4)

3-Point Wide Row Planter Flat Fold Marker 113-519M 4/9/04 2 Great Plains Mfg., Inc.
Using this Manual
This manual has been prepared to instruct you in the
safe and efficient operation of your 3-Point Wide Row
Planter Flat Fold Marker. Read and follow all instructions
and safety precautions carefully.
The parts on your 3-Point Wide Row Planter Flat Fold
Marker have been specially designed and should only
be replaced with genuine Great Plains parts. Therefore,
should your 3-Point Wide Row Planter Flat Fold Marker
require replacement parts go to your Great Plains
Dealer.
The right hand and left hand as used throughout this
manual is determined by facing in the direction the ma-
chine will travel when in use unless otherwise stated.
!
The SAFETY ALERT SYMBOL indicates that there is a
potential hazard to personal safety involved and extra
safety precautions must be taken. When you see this
symbol, be alert and carefully read the message that fol-
lows it. In addition to design and configuration of
equipment; hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Watch for the following safety notations through-
out your Operators Manual:
!
DANGER!
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury. This
signal word is limited to the most extreme situations.
!
WARNING!
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!
CAUTION!
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.
NOTE: Indicates a special point of information which
requires your attention.
cation. The parts sections are for reference only and
don’t require cover to cover reading. After reviewing
your manual store it in a dry, easily accessible location
for future reference. For your safety and to help in developing a better under-
standing of your equipment we highly recommend that
you read the operator sections of this manual. Reading
these sections not only provides valuable training but
also familiarizes you with helpful information and its lo-
Using this Manual
Introduction