Great Plains Yield-Pro Planter Seed Tube - Manual (Page 5)

5/10/2006
Great Plains Mfg., Inc.
5 Installation Instructions
Refer to Figure 11
24. Connect each seed tube located on the seed
tube bracket with corresponding seed tube lo-
cated on each planter wing frame. Refer to di-
agram to the right for corresponding seed
tubes.
25. Use previously removed clamps to secure air
hoses to seed tubes located on planter wing
frame.
26. Complete for all seed tubes on both sides of
planter.
27. Attach previously removed y-tubes to air hos-
es D and H.
Refer to Figure 12
28. Use 1 large cable tie to loosely hold the
1 1/2" airhoses together. It must be loose
enough to let them slide against each other.
Use 1 smaller tie to secure the large tie in
place by hooking it to one,
1 1/2" hose.
Refer to Figure 13
29. Use I small cable tie to secure the air hose de-
noted as H in Figure 11 to another air hose.
NOTE: This prevents the air hose from mal-
functioning or being damaged.
Figure 11
Air Hose Routing
24477
Figure 12
Cable Tie Air Hoses
24478
Air Hose H
Figure 13
Cable Tie Air Hose H