Great Plains John Deere 750 20' Flat Fold Markers - Manual (Page 7)

3/20/2003 205-038M
5 Operating and Assembly Instructions
Most accidents are the result of negligence and
carelessness, usually caused by failure of the op-
erator to follow simple but necessary safety
precautions. The following safety precautions are
suggested to help prevent such accidents. The
safe operation of any machinery is a big concern
to consumers and manufactures.Your Flat Fold
Marker has been designed with many built-in
safety features. However, no one should operate
this product before carefully reading this Opera-
tors Manual.
General Operation & Repair
1. Never allow the Flat Fold Marker to be operat-
ed by anyone who is unfamiliar with the oper-
ation of all functions of the unit. All operators
should read and thoroughly understand the
instructions given in this manual prior to mov-
ing the unit.
2. Make sure safety rules are understood before
operating machinery or tractor.
3. Never permit any persons other than the op-
erator to ride on the tractor.
4. Never permit any persons to stand near the
Flat Fold Marker while it is in operation.
5. Regulate your speed to the field conditions,
maintaining complete control at all times.
6. After repairing or adjusting, make sure all
tools and parts are removed from the imple-
ment before attempting to operate it.
7. Do not grease or oil machine while it is in op-
eration.
8. Loose fitting clothing should not be worn as it
may catch in moving parts.
9. Never dismount from a moving tractor.
10. Do not leave the tractor or the implement un-
attended with the engine running.
11. Do not stand between the tractor and the im-
plement during hitching.
12. Detach and store implements in an area
where children normally do not play. Stabilize
implements by using suitable supports and
block wheels.
Operating and Assembly Instructions
13. If a hydraulic leak develops, correct it immedi-
ately. Escaping hydraulic oil can have ex-
tremely high pressure. A stream of high
pressure oil may easily penetrate the skin as
with modern needle-less vaccination equip-
ment - but with the exception that hydraulic
fluid may cause blood poisoning. It is impera-
tive that the connections are tight and that all
lines and pipes are in good condition. If an in-
jury is caused by the escaping hydraulic fluid,
see doctor at once!
14. Use a piece of cardboard or wood to detect
leaks of hydraulic oil under pressure.
15. Be sure to relieve all hydraulic pressure before
disconnecting any lines or pipes between the
implement and the tractor hydraulic system.
Keep all guards and shields in place.
Transporting
1. Use good judgement when transporting trac-
tor and implements on the highway. Always
maintain complete control of the machine.
2. Limit transport speed to 20 mph. Transport
only with a farm tractor of sufficient size and
horse power.
3. Always make sure flashing safety lights, “Slow
Moving Vehicle” emblem, and reflectors are in
place and visible prior to transporting the ma-
chine on public roads.
4. Know your state and local laws concerning
highway safety and regulations. Comply with
these laws when transporting machinery.
5. Use warning flags or approved warning lights
at night and during other periods of poor visi-
bility. Do your best to prevent highway acci-
dents