Great Plains 3PYP Steering Kit - Manual (Page 9)

Line Up Template on Caster Weldment Arm Front Page Part Lists Great Plains Manufacturing, Inc. 9
01/24/2011 Front Page Part Lists 401-776M
Line Up Template on Caster Weldment Arm
Refer to Figure 13
17. Read instructions imprinted on metal template.
18. Use left and right guides to line up with edge of
either the right or left caster arm you are working on.
Null4:
Refer to Figure 14
19. Place template
on caster arm being sure to line
up edge with appropriate line on template.
20. MAKE SURE the end hole of the template lines up
with the end hole on the caster arm .
21. Hold template in place while making three center
punch marks for hole placement.
22. With white marking pencil make a mark on each side
of the caster arm where it will be cut off.
Null4:
Figure 13
Template
31896
Null4:
Figure 14
Place Template on Caster Arm
31893
17
54
17
54