Great Plains CTA4000HD - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2009 Printed 04/02/2009 221-646M
Opener Stop Update
CTA4000HD Air Drill Implements
General Information
These instructions explain how to install an opener stop
update kit on an existing drill that lacks these stops.
The stops reduce the risk of hose entanglement when
the drill is folded.
These instructions apply to an installation of:
One kit updates one drill (several rows on both wings).
Drills manufactured in March 2009 or later require no
kits.
Related Documents
Have the Operator Manual at hand for drill movements.
Have the current Parts Manual at hand for parts ID.
Notations and Conventions
“Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Left, Right,
Front, Back, Up, Down.
Call-Outs
Used with:
• CTA4000HD-5010
• CTA4000HD-6575
• CTA4000HD-8006
Kit Kit Description
221-644A CTA4000HD-6 OPENER STOP UPDATE
221-645A CTA4000HD-7.5-10 OPENER STOPS
Drill Model Kit Compatibility
CTA4000 None - not required on non-HD drills
CTA4000HD Serial number A1159T or lower
160-037M Operator, CTA4000HD
160-037M Parts, CTA4000HD
When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
!
Figure 1
A Stop Installed
29461
to Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Two-digit callouts in the range 11 to 14 refer-
ence new parts from the new parts lists
beginning on page 7.
U
D
L
R
B
F
1 9
11 14