Cool-Lux A100 User Manual
Page 102
User’s Manual
4-20
O
PERA
T
IN
G
B
AS
IC
S
❑
Operate the computer at Full Power. Do not use power-saving features.
❑
While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display properly.
❑
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
❑
WinDVD Creator cannot edit or play copy protected content.
❑
Do not change display settings while using WinDVD Creator.
❑
Do not enter standby/hibernation mode while using WinDVD Creator.
❑
Do not operate WinDVD Creator immediately after turning on the com-
puter. Please wait until all Disc Drive activity has stopped.
❑
When recording to a DV-Camcorder, to ensure you capture all of your
data, let the camcorder record for a few seconds before you begin record-
ing your actual data.
❑
CD recorder, JPEG functions, DVD-Audio, miniDVD, and Video CD
functions are not supported in this version.
❑
While recording video to DVD or tape, please close all other programs.
❑
Do not run software like a screen saver because it can put a heavy load on
the CPU.
❑
Do not run communication applications like a modem or a LAN.
2. Before recording the video to DVD.
❑
When you record to DVD disc, please use only discs recommended by the
Drive manufacturer.
❑
Do not set the working drive to a slow device like a USB 1.1 hard disk
drive or it will fail to write DVD.
❑
Do not perform any of the following actions:
• Operate the computer for any other function, including using a mouse or
TouchPad or closing/opening the LCD panel.
• Bump or cause vibration to the computer.
• Use the Mode control button and Audio/Video control button to repro-
duce music or voice.
• Open the DVD drive.
• Install, remove or connect external devices, including the following: PC
card, SD card/Multi Media Card/Memory Stick, USB devices, external
display, i.LINK devices, optical digital devices.
❑
Please verify your disc after recording important data.
❑
DVD-R/+R/-RW disc cannot be written in VR format.