Starting the computer by password, Installing the battery pack – Cool-Lux A100 User Manual

Page 139

Advertising
background image

6-15

Starting the computer by password

P

OW
E

R

AN
D

P

OW
E

R

-

U

P

M

OD
E

S

Installing the battery pack

To install a battery pack, follow the steps below.

CAUTION: The battery pack is a lithium ion battery, which can
explode if not properly replaced, used, handled or disposed of. Dis-
pose of the battery as required by local ordinances or regulations.
Use only batteries recommended by TOSHIBA as replacements.

1. Be sure the computer’s power is off and all cables are disconnected.
2. Insert the battery pack.

Figure 6-3 Installing the battery pack

3. Push the battery pack until it is firmly seated.

Starting the computer by password

To start up the computer with the user password, follow these steps:

1. Turn on the power as described in Chapter 3,

Getting Started

. The follow-

ing message appears:

Password =

CAUTION: At this point, the hot keys Fn + F1 to F9 do not work.
They will function after you enter the password.

2. Enter the password.
3. Press Enter.

B

ATTERY

PACK

Advertising