When writing or rewriting – Cool-Lux A100 User Manual

Page 93

Advertising
background image

4-11

Writing CDs on CD-RW/DVD-ROM drive

O

PER

ATING

B

ASICS

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the man-
ufacturers above. Operation of other media cannot be guaranteed.
◆

CD-RW can generally be rewritten about 1,000 times. However, the actual
number of rewrites is affected by the quality of the media and the way it is
used.

◆

Be sure to connect the AC adaptor when you write or rewrite.

◆

Be sure to close all other software programs except the writing software.

◆

Do not run software such as a screen saver which can put a heavy load on the
CPU.

◆

Operate the computer at full power. Do not use power-saving features.

◆

Do not write while virus check software is running. Wait for it to finish, then
disable virus detection programs including any software that checks files
automatically in the background.

◆

Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and damage data.

◆

Write from the computer’s HDD to the CD. Do not try to write from shared
devices such as a LAN server or any other network device.

◆

Writing with software other than RecordNow! has not been confirmed.
Therefore, operation with other software cannot be guaranteed.

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.
◆

Always copy data from the HDD to the CD. Do not use cut-and-paste. The
original data will be lost if there is a write error.

◆

Do not perform any of the following actions:
◆

Change users in the Windows XP operating system.

◆

Operate the computer for any other function, including use of a mouse
or Touch Pad, closing/opening the LCD panel.

◆

Start a communication application such as a modem.

◆

Apply impact or vibration to the PC.

◆

Install, remove or connect external devices, including the following: PC
card, USB devices, external display, i.LINK devices, optical digital
devices.

◆

Open the optical media drive.

◆

If the media is poor in quality, dirty or damaged, writing or rewriting errors
may occur.

Advertising