Cool-Lux A100 - Manual (Page 199)

C-3
Appendix C
A
PPEN
DIX
C
; Return to command mode. Causes the modem to return to com-
mand mode after dialing a number, without disconnecting the
call.
S=n Dial a telephone number previously stored using the &Zn=X
command (See &Zn=X command for more information). The
range is 0-3.
EnEcho command
This command controls whether or not the characters entered from your
computer keyboard are displayed on your monitor (echoed) while the
modem is in command mode.
E0
Disables echo to the computer.
E1 Enables echo to the computer (default).
Result Codes:
OK
n=0,1
ERROR
Otherwise
HnHook control
This command instructs the modem to go on-hook to disconnect a call,
or off-hook to make the phone line busy.
H0
Modem goes on-hook (default).
H1 Modem goes off-hook.
Result Codes:
OK
n=0,1
ERROR
Otherwise
In Request ID information
This command displays product information about the modem.
I0
Returns modem identity string and driver version number.
I3 Same as I0.
I9 Returns region ID in English.
Result Codes:
OK
n=0,3,9
ERROR
Otherwise