Great Plains Verti-Till Field Update - Manual (Page 17)

Great Plains Manufacturing, Inc. Closeout 17
08/06/2007 596-186M
Closeout
Refer to Verti-Till Operator’s manual.
84. Connect the Transport and Coulter lift circuits to the
tractor.
85. If the transport lift locks are not installed, carefully
extend the transport lift circuit to raise the implement
enough to install the locks.
86. Conduct the “Bleeding Transport Cylinders” proce-
dure from the Operator’s manual.
87. Check all hydraulic fittings for leaks.
88. Extend the Transport lift circuit and install the locks.
89. Lower the fork lift or dismount the implement from
the blocks or stands used to hold it up.
90. Remove the locks from Transport lift cylinders, and
exercise both lift circuits, checking for binding or
missing bolts at all hinge points.
91. Raise both circuits and install locks.