Canon DC210 - Manual (Page 71)

Trouble? 71
Ad
di
tio
n
al In
for
m
ati
o
n
CANNOT READ THE DISC
CHECK THE DISC Disc could not be read. Try cleaning it or replace the disc. 73
This message can also appear if the camcorder has exceeded its
operational temperature. Turn off the camcorder and let it cool
down before resuming use. –
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 74
The disc may not be loaded correctly. Try removing the disc and
reinserting it. 22
• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC There was an error when reading the disc or attempting to write
onto it. Try cleaning the disc or replace it. 73
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 74
The disc may not be loaded correctly. Try removing the disc and
reinserting it. 22
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 22
NO DISC No disc is loaded. Insert a disc. 22
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 74
LOADING THE DISC The disc is being read. Wait before you start recording. –
AVOID MOVING THE
CAMCORDER Try not to move the camcorder while the image is being recorded. –
UNABLE TO RECOVER
DATA Could not recover a corrupted file. –
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use. 74
DISC FULL The disc is full (“ END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
22
55
TASK IN PROGRESS
DO NOT DISCONNECT
THE POWER SOURCE The camcorder is updating important file allocation data on the disc.
Do not disconnect the compact power adapter or remove the
battery pack. –
NO IMAGES No images are recorded on the disc. –
THE CAMCORDER IS SET
TO STILL IMAGE MODE You pressed the Start/Stop button while recording still images
(
mode).
–
NAMING ERROR The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and initialize the disc, erase
all the images on the disc (DVD-RW in VR mode) or replace the
disc. –
Message Explanation
D121C_NTSC-E.book Page 71 Thursday, January 11, 2007 2:46 PM