Great Plains John Deere 455 30' Flat Fold Markers User Manual
Page 12
Advertising
John Deere 455 25’ & 30’
205-046M
10/17/2002
10
Refer to Figure 9
14. Bolt the sequence valve (1) to the valve mount
using the 3/8” x 3/4” long bolts (2). Remove
the upper flanged nut holding the tongue to
the crossbar on the cph frame (opposite the
slow moving vehicle emblem). Insert the
valve mount (3) on the existing bolt and re-
place the flanged nut. Attach the hydraulic
hoses as shown. The front hoses going to the
tractor should be routed through the tongue
from the bottom side.
Figure 9
Hydraulics
20111
Advertising
This manual is related to the following products: