Great Plains Air-Pro Meter Ultra Test Stand Kit - Manual (Page 5)

Mount Air-Pro
®
Meter Front Page Part Lists Great Plains Manufacturing, Inc. 5
09/27/2011 Front Page Part Lists 403-533M
Mount Air-Pro
®
Meter
Refer to Figure 10
12. Remove the plastic plug from the meter housing
.
Refer to Figure 11 and Figure 12
13. After you remove the plastic plug from the meter
housing install the
1 ⁄
4
in pressure port and nut
as shown.
14. The pressure sensing hose from back of the Ultra
Test Stand is connected at this port.
15. Use the 1
1 ⁄
4
in to 1
1 ⁄
2
in adaptor to transition the
blower supply hose to the air in port of the meter.
Refer to Figure 12
16. Mount the Air-Pro
®
meter on the locating pins of the
brackets installed in Figure 5 and clamp in place.
Null4:
Figure 10
Meter Housing Plastic Plug
31074
3
3
Null4:
Figure 11
Adaptor for Blower Hose
31067
5
22
22 17
5
Null4:
Figure 12
Mount Air-Pro
®
on Test Stand
31068
17