Great Plains 3-Point Solid Stand Drills - Manual (Page 21)

19 8/19/04 Great Plains Mfg., Inc. 113-324M
Ref. Part No. Part Description
Section 7 Dual Marker Hydraulics Used With CDH, CPH, & CC
1. 113-263D 3-Point Sequence Valve Mount
2. 802-023C Bolt, Hex 3/8"-16 x 1 3/4" Long
3. 804-013C Washer, Lock 3/8"
4. 803-014C Nut, Hex 3/8"-16
5. 810-006C Sequence Valve
6. 811-021C Hydraulic Fitting 1/2" FNPT Swivel x 3/4" MORB
7. 806-002C U-Bolt 1/4"-13 x 3 1/2" x 4 1/2" Long
8. 804-015C Washer, Lock 1/2"
9. 803-020C Nut, Hex 1/2"-13
10. 811-009C Hydraulic Fitting 1/2" FNPT Tee
11. 811-017C Hydraulic Hose 1/4" x 156" Long {15’ Drill}
811-015C Hydraulic Hose 1/4" x 192" Long {20’ Drill}
12. 811-214C Hydraulic Fitting 1/2" MNPT x 3/8" FNPT Street L
13. 810-005C Hydraulic Cylinder 2" x 8" Stroke
14. 811-156C Hydraulic Fitting Elbow 3/8" MNPT
15. 810-058C Needle Valve 3/8"
113-137A 3-Point Drill Marker Valve Kit for use with Combination Drill Hitch, Center Pivot Hitch and
Coulter Caddy. Includes 1 Each of Items 1, 5, 7 & 10; 2 Each of Items 2 Through 4, 8 & 9;
and 3 Each of Item 6.
Note: To avoid cracking the hydraulic fittings, DO NOT use plastic sealant tape. Use only liquid pipe sealant to seal
the hydraulic fittings.