Vertical Communications DXP - Manual (Page 19)

3.2 Using Speed Dial
•
To dial a speed dial number from a preprogrammed DSS
button,
1. Press preprogrammed button. If you programmed the number
at the second level of a DSS button, press HOLD before
pressing button.
2. When called party answers, lift handset.
•
To dial personal or system speed dial numbers from your
keypad,
1. Dial desired code:
0-9 = personal speed dial number,
✳100–✳599 = system speed dial number.
If you are already on a line, press HOLD then dial code.
2. When called party answers, lift handset.
NOTE: On some earlier systems, the available speed dial codes are
✳100–✳299.
3.3 Using Last Number Redial
•
To redial the last number that you dialed at your telephone,
1. Press SPEAKER (or hang up handset) to disconnect current
ringing or busy tone.
2. Dial #.
3. Listen for ringing or busy tone over the telephone’s speaker.
When called party answers, lift handset, or if called party is
busy, press SPEAKER to disconnect.
GCA70-314 Making Calls
Non-LCD Station User's Guide 3–3